Extended range for Twin Engine Operations
But this answer was already given by me on another question. So if I'm correct I give my turn to Avro
I see he was already before me with his correction.
When once you have tasted flight, you will forever walk the earth with your eyes turned skyward, for there you have been, and there you will always long to return."
Avro wrote: i always tend to use the other one it's shorter :p
Chris
hehe how do we call it when somebody doesn't do anything more then he wishes to? lazy?
it's completely correct Avro, you are cleared for TO, have a nice flight
Yes the bulb was larger, but my question is why does the cruise speed decrease when adding such a big bulb.
Maybe I didn't express mysekf very well in my question - sorry
Well, in an aerodynamic point of view, the big bulb increases the aerodynamic drag a lot. So with the same engines (thrust), the cruise a,d maximum speed are lower
realplaneshaveprops wrote:Well, in an aerodynamic point of view, the big bulb increases the aerodynamic drag a lot. So with the same engines (thrust), the cruise a,d maximum speed are lower
Koen
Indeed. Due to the high bulb the flow will be accelerated over it. At the top of it the flow velocity will be maximum and will be higher than the speed of sound. those supervelocities at the top of the bulb will induce some high drag due to the local shockwaves. To reduce this amount of drag the cruising speed is simply reduced.
It's a device mixing the cold and slow bypass air with the hot and fast core air. By having such a form you increase the effective area which will be used for the mixing.
Thanks to this mixing you will reduce the noise of the engine by reducing the shear which otherwise is quite big between the slower fan flow and fast core flow.
It features exhaust design featuring mixer and an integrated nozzle for good efficiency (this design is also found in IAE V2500 series and on some Rolls-Royce RB211 series) and it also features the unique 'petal' thrust reversers rather than the conventional cascade design. This is due to the A340 requirements of maximum range and efficiency.
I don't know if this is correct but I think that you should have erased the name of the photographer
SN_Bigbirdy wrote:it also features the unique 'petal' thrust reversers rather than the conventional cascade design.
Are you sure ?
AFAIK there are two basic types of thrust reversers in use:
- Target- or bucket-type reversers
- Cascade reversers.
The latter one can be of the clamshell (B727), blocker door(B767 etc..) and "petal" type with internal or external cascade baffles.
Cascade reversers have the advantage that the exhaust flow can be better directed into optimum directions. They are however heavier and require more maintenance.
This would mean that the petal type is in fact a cascade reverser !!