RC SNBA A330
Yes, the plane flew. Here is the evidence: http://perso.wanadoo.fr/mes-avions-rc/Ovostar wrote:Does this plane already flew ? if yes, someone got a picture ?
-
HorsePower
- Posts: 1589
- Joined: 12 Jan 2005, 00:00
- Location: France
I don't know if it flew already. Maybe it's written off, because there was some serious damage.
I saw in April, when I was in SA, on a local TV chain, a report on the first test flight, where it was damaged when staring up. They finished the report saying: "It will need quite drastic repairs to fly one day... if it ever will fly..."
I saw in April, when I was in SA, on a local TV chain, a report on the first test flight, where it was damaged when staring up. They finished the report saying: "It will need quite drastic repairs to fly one day... if it ever will fly..."
Correction, the world's largest rc aircraft is this B-29, span= 9 meters weight= 200Kg and built by some members from the West-Vlaamse Aeroclub www.wvlac.be . It needs 3 persons to fly itHorsePower wrote: Currently, the biggest RC four engined aircraft is an A380-800 1/15 scaled.



Regards,
Kristof Vandermoere
Kristof Vandermoere
-
Ivan_Eagle
- Posts: 190
- Joined: 16 Apr 2005, 00:00
- Location: Mechelen, Hombeek
-
cessna152pilot
- Posts: 43
- Joined: 17 Jan 2006, 00:00
- Location: Denver, Colorado, USA
-
b-west
RTBF 1 also made a report on yesterday's news. It is indeed impressive to see it flying. It had some problems at the end of the flight, as the rudder was shaking strongly, but the pilot managed to get it back safe on the ground. It would have been a pity to crash such an expensive toy...b-west wrote:The A330 was just shown during the news broadcast on the flemish channel "één"! It is one impressive bird
Nice to see that this is the first SN BA A333 to be repainted in the new colours!
Also one question: why did a French amateur choose SN BA as a model for its A333?
André
ex Sabena #26567
ex Sabena #26567
Here is a link to the video: http://www.vrtnieuws.net/nieuwsnet_mast ... shtml?play
sorry, it is only available in Dutch.
Greetz,
Dave
sorry, it is only available in Dutch.
Greetz,
Dave
- BrusselsNick
- Posts: 70
- Joined: 14 Apr 2006, 00:00
- Location: Antwerp
nice
Hello ,
Awesome model , I saw it on the " één " news ,
Nice plane. Pitty that its tail broke off , such a nice machine !!!
grtz ,
Awesome model , I saw it on the " één " news ,
Nice plane. Pitty that its tail broke off , such a nice machine !!!
grtz ,
img]http://status.ivao.aero/210301.png[/img]
- ehamspotter
- Posts: 501
- Joined: 03 Nov 2004, 00:00
- Location: Kessel(Belgium)
- Willfrance
- Posts: 11
- Joined: 17 Jun 2006, 00:00
- Location: Montbeliard, France
- Contact:
RC A 300-300
Hi Guys
I am the builder of the SNBA A330-300
I read with interrest all your comments abut my model
I will come back later here to explain more things if you both want to, but before that, the plane is still flying, SNBA show some interrest about my model, and I join you a pic taken last month
do not hesitate to contact me direct or via my web site : www.mes-avions-rc.net
Will
I am the builder of the SNBA A330-300
I read with interrest all your comments abut my model
I will come back later here to explain more things if you both want to, but before that, the plane is still flying, SNBA show some interrest about my model, and I join you a pic taken last month
do not hesitate to contact me direct or via my web site : www.mes-avions-rc.net
Will
- Willfrance
- Posts: 11
- Joined: 17 Jun 2006, 00:00
- Location: Montbeliard, France
- Contact:
To all
here are some more informations
I am 36 years old, and I build this radio controled model during 4 years
It made its first flight on August of 2005
weight is 28 kg, with 4 liters of kerosen
some people talked about fire in that plane, it is not right
I had akerosen leak on the right tank ( I use soft plastic tanks installed in the wings ) and the base of the wing is made of styro
Kerosen make the sameeffect as acid, and styro became as cotton
I had to remove the destroyed styro, to replace by polyuretan foam
Then I had the french TV coming here to record, to announce the Paris fair in April on the TV news
The same day, you probably saw it on the belgian TV
The trouble I had with the rudder was because I did not build strong enough this part of the plane
I had to modify it to reinforce
I could land safely that day
The flying time between take off and landing is about 5.30 min, the total engine working time is about 11 min, time to roll, and keep 1 liter for security, in case I have to pull up
I have coosen SN BA colors, because I did not want to paint colors without asking the company ( in case of accident, it is beeter to have asked before ), and SNBA replied to me ! not a lot of companied have replied to me, thanks to them, moreover, I like those colors
Then I have been told, 2 years ago, that they wanted me to paint new colors, even if they did not get new colors A330's already, and I have received a plastic model as example
I can see today on that forum, that OO-SFo has been re painted, and surprise, winglets are painted, not the model I received
At that time, I started particiating to meetings, and End of May, I was in Mallorca Jet Meeting, in Palma de Mallorca, and last week end, I was in Arles, near MArseille
You can see more details on my web page
Now, I have to build for customers, a KC 10 ( refueling DC 10 ) an A330-300 for Indonesia, and maybe an A300-600
Feel free to contact me for any informations you would like to get
Will
here are some more informations
I am 36 years old, and I build this radio controled model during 4 years
It made its first flight on August of 2005
weight is 28 kg, with 4 liters of kerosen
some people talked about fire in that plane, it is not right
I had akerosen leak on the right tank ( I use soft plastic tanks installed in the wings ) and the base of the wing is made of styro
Kerosen make the sameeffect as acid, and styro became as cotton
I had to remove the destroyed styro, to replace by polyuretan foam
Then I had the french TV coming here to record, to announce the Paris fair in April on the TV news
The same day, you probably saw it on the belgian TV
The trouble I had with the rudder was because I did not build strong enough this part of the plane
I had to modify it to reinforce
I could land safely that day
The flying time between take off and landing is about 5.30 min, the total engine working time is about 11 min, time to roll, and keep 1 liter for security, in case I have to pull up
I have coosen SN BA colors, because I did not want to paint colors without asking the company ( in case of accident, it is beeter to have asked before ), and SNBA replied to me ! not a lot of companied have replied to me, thanks to them, moreover, I like those colors
Then I have been told, 2 years ago, that they wanted me to paint new colors, even if they did not get new colors A330's already, and I have received a plastic model as example
I can see today on that forum, that OO-SFo has been re painted, and surprise, winglets are painted, not the model I received
At that time, I started particiating to meetings, and End of May, I was in Mallorca Jet Meeting, in Palma de Mallorca, and last week end, I was in Arles, near MArseille
You can see more details on my web page
Now, I have to build for customers, a KC 10 ( refueling DC 10 ) an A330-300 for Indonesia, and maybe an A300-600
Feel free to contact me for any informations you would like to get
Will
- Willfrance
- Posts: 11
- Joined: 17 Jun 2006, 00:00
- Location: Montbeliard, France
- Contact:
- fokker_f27
- Posts: 1812
- Joined: 19 Nov 2005, 00:00
- Location: Weerde, Zemst - Belgium